RESIN PRINTING GUIDE
RESIN PRINTING GUIDE
All 20 colors of 3D MODEL resin have same settings for each 3D printer.
Once a color is adjusted for a 3D printer, there is no need to adjust any other settings for different colors.
3D EXOTIC METALSHINE RESIN
3D EXOTIC METALSHINE LCD/DLP/LED resins needs around %20 - %25 more exposure time than our 3D MODEL resins. Because of metal effect 3D EXOTIC METALSHINE resins become bit more softer while printing, for this reason must be used a bit more thicker support comparing to our 3D MODEL resins
For SLA/LASER printers exposure time are same as our 3D MODEL resins. No need to adjust laser power but must be used a bit more thicker support comparing to our 3D MODEL resins
We have made videos below for most commonly used 3D printers on the market to give you an idea as a start point of resin settings.
Below given values of resin settings may vary for each printer.
You can contact us for Model Resin settings of other 3D printers. We will try to help you to find best settings of our resins for your 3D printer.
3D Model Resin Setting for Anycubic Photon
Download 3D Model Resin profile for Chitubox |
|
3D Model Resin Settings for Wanhao D7
Download 3D Model Resin profile for Wanhao D7 Workshop
|
|
3D Model Resin Settings for Phrozen Shuffle XL
Download Dragon 3D Model Resin profile for NanoDLP |
|
3D Model Resin Settings for Peopoly Moa'
BE AWARE!!! Our resins are NOT suitable for PDMS vat
Download Dragon 3D Model Resin settings for Moai |
|