Check the compatibility from the product description page. If your 3D printer is not listed, you can contact us for help.
Yes you can mix all different colors at any ratio which also provides to make your own color.
LCD/DLP/LED Fast Cure resins are designed to be extremely fast-curing material under low light-energy cases. Whereas, SLA/LASER Standart Cure resins are designed to be used with LASER UV light sources 3D printers.
Our resins have wide range of wavelenght from 220nm up to 420nm. The peak absorption is between 395nm - 405nm.
We suggest you to use IPA or ETHANOL of %95 or more purity.
We suggest you to use 405nm, 30W or more powered UV LED lamps to cure our resins.
For full safety guide please check Product Safety Data Sheet on our support page.
Always wear protective gloves while working with the resin. Avoid contact of your skin with the resin. Resin may cause skin irritation for some people.
The cap of the bottle should be tightly closed and the bottle should be kept in dark and cool place away from sunlight.
No, Our resins are NOT suitable for PDMS vats. Resins may damage your PDMS vat.
Yes, you can safely pour leftover resin into original bottle but we suggest you to filter the leftover resin before pouring into unused resin to avoid any possible residue in the mixture.
Yes, we can make any color from Ral, Ncs or Pantone color charts but the minimum quantity has to be 10L or more. For any color request please contact us.
For up to 1L, shipping cost is 15$, for up to 1.5L shipping cost is 20$ and for 2L or more, shipping is free of charge and those prices are valid for all countries.
Local customs authorities may charge duties or fees upon import. We do not handle any custom fees and it should be
paid by you at your countries customs service.
Except orders from Turkey, we do not add any VAT on the prices.