Uniz SLAHS PLUS 3D Printer

In News

Don't have enough patience when printing large objects? Or are you afraid of a failed oppression at any moment? It's time to meet Uniz Slash Plus, which offer you the right results.

According to the industry standard, the 3D print speed is calculated by the quantity printed per unit of time. Normally, low-cost and ordinary 3D printers spend a lot of time printing 3D objects, and at the end of this high time requirement, they still can't deliver the right print. Why waste time with cheap printers where you can't print both slowly and accurately? FDM and laser SLA printers are very slow as they print an entire model line by line.

Uniz SLAHS PLUS 3D Printer

A more practical and robust way of creating a 3D geometric object is to make each row projected into a plane by reflecting it into a liquid bath. Digital light processing (DLP) and LCD printers work in this way, and today the fastest desktop 3D printers are printers that use this technology.

However, despite these technological advantages, they are still limited. Both DLP and LCD use photopolymerization, a chemical reaction that produces a high amount of heat on the fine separation surface, and when printing large solid objects at high speed, the temperature can rapidly rise to 260 to 315 ° C. As a result, they may also damage the object.

Because of this problem, the printer gradually slows down and saves you even more time when multiple printing is required.

Uniz SLAHS PLUS 3D Printer

Using an innovative design to overcome all these problems, Uniz Slash plus has integrated liquid cooling as close to the interface as possible and has managed to avoid overheating in an innovative way. In this way, the printing speed is achieved faster. If you're looking for speed and accuracy, you're sure to have the Uniz Slash plus 3D printer.

Specs:

  • Printing Technology LCD Stereolithography
  • Build Volume 192 × 120 × 200
  • 5" × 4.7" × 7.8"
  • XY Resolution 75µm
  • Highest Accuracy: ±20µm
  • Layer Thickness (Z resolution) 10, 25, 50, 100, 150, 200, 300µm
  • Profile: customizable
  • Separation Mechanism: Polymer film natural peel
  • Up to 100x more durable than PDMS
  • Support Uniz smart support technology
  • Printing Speed 1,000 cc/hr, 200 mm/hr thin walls
  • Resin Level Control Automatic level control

 

SLASH PLUS appeals to a wide range of users. It is ideal for everyone, from consumers to artists and designers. It is also suitable for a wide range of handicrafts, rapid prototyping, molding and various manufacturing applications.

Related Articles